![]() |
It absolutely made my day to hear from such a happy customer, and seeing one of my cardigans being worn by a real little one means so much to me—especially since I don’t have any babies in my life right now to model them!
![]() |
It absolutely made my day to hear from such a happy customer, and seeing one of my cardigans being worn by a real little one means so much to me—especially since I don’t have any babies in my life right now to model them!
I have been hard at work on this new knitting pattern, which I am calling Baby Tulip Cardigan. It has taken a lot of thought, and knitting. Cardigans just seem the best sort of garment for a baby, with none of that squeezing over the head of a jumper. The tulips are smaller than those on my Tulip Hat, but knitted in a very similar way. Each flower uses two separate lengths of yarn - one for the leaves and one for the flower, which are not carried between the flowers on the reverse of the work. I love the look of the raised flowers, but put them only on the front of the cardigan, as I felt they might be a bit bumpy on the back for a lying or sitting baby.
The pattern comes with instructions for four sizes (0-3 months, 3-6 months, 6-9 months and 9-12 months). I have written sized patterns before, but this one was slightly more complicated, as the flowers had to be placed on each version. (The pattern contains a lot of brackets, and I hope will be fairly straightforward to follow.)
The pattern is available on Ravelry, Etsy and LoveKnitting.
My resolve was to design more knitting this year, although I have been a little distracted by printing, walking, and now the gardening year is beginning! I have quite a few more ideas brewing, so time to start my next design.
I have been making a cardigan and hat for one of my workmates, who is expecting a baby with his partner in October. He loves cars, so I decided to add a bit to this cardigan and hat set. The pattern I used is on Ravely as Cardigan and Pompom Hat by Sirdar.
I did find the pattern a little confusing, as the front sections are cast off, and then stitches are picked up, and a yoke is knitted. It does seem it would have been better to have put the stitches on holders, as done for the back and arms. If I knit again this is what I would do.
I enjoyed adding the car, which my daughter helped me design with a grid. We have gone for sporty (with a fin), but not racing car. The wheels are embroidered on afterwards with two rings of chain stitch, as I thought it would be easier to make good circles this way. Wish the car on the back was a bit higher up. I also added a checkered flag to the rib on the hat, and sort of wish I had done this to the cardigan as well. Too late now. The wool I used is some lovely soft merino in DK from Blacker Yarns, and oddments for the cars. I had fun looking for car buttons, which I found on Etsy.
Although the baby is not due for a week or two I think I am pretty safe posting these pictures, as I am sure he does not spend the weekends looking a craft blogs.
Last time my daughter was home I managed to persuade her to do some modelling for two new patterns and project kits, which are now available from my work at Blacker Yarns. She really liked both garments, and I had to explain to her that they had to go back to work. Both are designed by Rita Taylor, and you can find other designs by her on Ravelry and Lovecrafts. You can follow links to The Ridgeway Gansey Cardigan, and the Hoveton Sweater to find the project kits at Blacker Yarns. What I think appeals about both patterns is that there is some fancy work, but also a bit of straight stocking stitch. Best of both worlds!
So feeling a bit sad at the moment, but hoping she will have lots of exciting times.
You may have noticed a lack of knitting posts, which is because I have been making myself a cardigan. Made from Quiet Moments Jacket from Drops Design, and I used Drops Flora wool (colour 04). I have used this wool before, and it is a mix of alpaca and wool. It was bought from Woolwarehouse, and was very reasonable.
I am a slow knitter, so this has really taken me a while. It is knitted from the top down, and I had three starts on the yoke. I nearly gave up, but then my husband spurred me on, by saying how can you not be able to knit something when you design your own pattern. So I gave it another go, and although I know there are one or two faults if you look closely, the leafs around the top is my favourite part of the pattern.
I didn't completely follow the pattern when it came to the cuffs, and ribbing. The pattern has a tapered wider cuff, but I thought these would be a bit annoying. Once I started the cuffs I realised I had to make them quite deep for the arms to be long enough, so then decided to make the ribbing around the bottom the same depth. So the cardigan is much longer than on the pattern, but I like a bottom warmer.
The only thing that I didn't like on this pattern was that for some of the increases and decreases, it just says increase x amount of stitches evenly across your row. I can see this is simpler for the pattern writer when you have different sizes, but I didn't like having to do the sums, and then decide what to do if it didn't work out exactly. Too much maths!
I still only used 6 x 50g balls of wool, which is 50g less than the pattern recommends, despite it being so much longer. Can't work out why, but perhaps a leafy hat is in order for my 2 leftover balls of wool.
One more photo of the latest version of my Windy Day Baby Cardigan. This cardigan was for my colleague's grandaughter, who is now back at home after some time in hospital. Looking pretty as a picture.
There are more details of the wool I used and a link to the pattern here.
Back in London now, and at my job in school. Pleased that I am booked for the vaccine tomorrow.
Just a reminder that there is still loads of time join in my Ginx Woolly Linx party for March. I would love to see what you have been working on.
I have been busy making just one more Windy Day Baby Cardigan from my new pattern. I am so pleased with how this one has turned out. It is in the largest size, 6-9 months. The wool is James C. Brett Baby Marble DK. It was fun to knit and see the colours change, and I think because the pattern is all garter stitch and fairly plain, it suits a pretty wool like this. I am very much looking forward to giving this cardigan to its new owner soon.
Just a reminder that there is still loads of time join in my Ginx Woolly Linx party for March. I would love to see what you have been working on.
For some of my test knits I was in London, with my button supplies, but for the one above I had the added problem of no buttons available. When you can only go out for essential shopping, it does make you wonder about the definition of essential. So with a bit of help from my husband the buttons you can see above were handmade from some applewood. I am in the process of making some more of these for my shop, and will write about this more in another post.
![]() |
| Knitted in Rico Baby Classic dk Light Grey |
You could knit this cardigan with any double knit wool, but I would recommend using Rico Baby Classic dk, or James C. Brett Baby Marble. I have almost finished another cardigan in the second wool, and will post a few pictures in a day or so.
On some of my samples I have added a bit of embroidery on the neckline. This isn't included in the pattern, but there are tips on my blog on how to use some simple embroidery stitches on your knitting.
So the pattern for the Windy Day Baby Cardigan will be available on ravelry, Etsy and LoveKnitting later today. Fortunately a have had quite a few baby births among my friends and family, so all these cardigans have found homes.
Just a reminder that there is still plenty of time join in my Ginx Woolly Linx party for February. I would love to see what you have been working on.
![]() |
| I know this is not great, but it did capture the feel of most of the photos that I took but haven't used. |